$7 Minimum Shipping — USA Addresses See checkout for all options. Insurance automatically added to all USA orders over $50. $13 Minimum Shipping — All Phone Orders Worldwide shipping — see checkout for shipping options.
For use with 2-56 threaded rods. Smaller lighter weight version. Usually used on .25 size (3 pound) and smaller models. Package of 2 each. Item is right most unit in photo.
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods. This brass connector has hex head to allow you to hold it while tightening.
Du-Bro's 2-56 size clevis with safety retainer. 12 each FEATURES Self tapping design leaves no slop on the pushrod threads. Square nylon shank for easy installation and adjustment. 10% lighter than a steel clevis. Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal. Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock. Safety lock is mounted in a track system on the clevis body to help prevent it from being lost. INCLUDES 12 each 2-56 Safety Lock Kwik-Link Clevises REQUIREMENTS 2-56 Pushrods of modeler's choice Installing clevises onto pushrods SPECIFICATIONS Length: 1-1/8" Width: 5/16" Shank Width: 3/16" COMMENTS For other sizes of safety lock clevis', use: 2-56 (DUBQ1510 qty 2) (DUBQ1511 qty 12) 4-40 (DUBQ1514 qty 2) (DUBQ1515 qty 12) 2mm (DUBQ1518 qty 2) (DUBQ1519 qty 12) For replacement Slide Locks, order DUBR0821
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
E/Z Connectors for up to .078 (2-56) pushrod or cable. 4-40 x 1/8 Slotted Screw locks pushrod or cable in place. Black snap on washer & push on steel retainer included. 2 units per package.
Bulk Pack contains 12 each. Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 1.85mm (.074"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Instal in 5/64" (1.9mm) hole.
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 2mm (.079"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Install in 7/64" (2.6mm) hole.
Stud of ball is 0-80 thread with black nut. Perfect fit for most glow throttle arms pefectly. Bolt to control hors and servo horns also. Brass fitting fits and solders onto .062 (1/16") steel wire or pushrod cable. Nylon ball link also included.
Retains simple L bend pushrod ends in your control or servo horn. For .062 (1/16") wire. This is a common size music wire to use for hand built pushrods.
Easily snaps over simple L bends to retain your pushrod end in servo or control surface horn. For .072 wire size. .072 is the diameter of the non-treaded portions of 2-56 pre-threaded pushrods.
GWS rack of 6 L bend ratainers. Simply bend an "L" into the end of your wire, put the eyelet of this retainer over the L end then clip the base over the leg of your wire. Perfect solution for quick and easy pushrod ends.
Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia rods, link guards included. 4-40 are for use with .093 dia rods, spring keepers are included. Thread onto .072 wire. Typical wire size that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like left 2 items in sample photo.
Solder onto .072 wire. This is the typical size wire that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like center 2 items in sample photo.
Thread onto .072 wire. Typical wire size that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like left 2 items in sample photo.
Solder onto .072 wire. This is the typical size wire that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included.
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering.
(2) 2-56 Clevises and Retaining Clips
Heat treated tempered steel with retaining clip. 2-56 thread.
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering.
(12) 2-56 Clevises and Retaining Clips
Heat treated tempered steel with retaining clip. 2-56 thread. 12 per package.
Adjustable, spring action assembly protects servo from shock and stalling. Excellent for throttle or rudder nosewheel hookups. Protects servo gears from being stripped with shocks. Light and heavy duty spring included for up to .072 diameter control rods. 11 piece set.
Handy set of 8 black nylon keepers. Fits soft wire used to make 2-56 pushs rod wire. Black nylon material. Simply bend the end of your pushrod into an "L". Put the L through the servo or control horn. Bend the hand back and clip onto the rod. Simple use, removes and instals quickly. Keeps your push rods from slipping out of the control horns. Light weight, simple and they work great!
Example photo is of our .032 park flier size "Flexi-Keeper" retaining an L bent push rod and a control horn.
Control horn & wire are not included in set.
SKU Number: RRCFLEXIKEEP256
2-56 Rod Ends and Clevises
Threaded 2-56 hardware connects a pushrod to a control horn or servo arm, and this category collects the clevises, connectors, and links sized for 2-56 threads and wire in the .062 to .072 inch range. These parts handle the light control loads typical of park flyers and small sport models.
Nylon Kwik Links and Couplers
Du-Bro Mini Nylon Kwik Links in 2-56 thread snap onto a control horn and thread onto the rod for adjustment, and they are offered in two-packs and bulk packs for builders working through several models. Sullivan 2-56 couplers join wire up to .034 inch, giving another way to link pushrod sections.
Connectors and Safety Links
The Du-Bro Kwik Grip E-Z Connector in 2-56/2mm clamps to a servo arm for tool-free length changes, while the 2-56 Safety Lock Kwik-Links add a retaining feature that helps keep the link closed in flight.
Review the options below to match the right 2-56 fitting to your linkage.
 "Du-Bro Mini Nylon Kwik Links 2-56")
 "Sullivan 2-56 Couplers for up to .034 Inch wire 8PC")
 "Du-Bro 2-56 Kwik Links Nylon 2-Pack")
 "Du-Bro 2-56 Kwik Links Nylon Bulk Pack")
 "Du-Bro Kwik Grip E-Z Connector 2-56/2mm")
 "Du-Bro 2-56 Safety Lock Kwik-Links 2PK")
 "Du-Bro 2-56 Safety Lock Kwik-Links 12PK")
 "Du-Bro Heavy Duty E-Z Connector 2-56/2mm")
 "Du-Bro E-Z Connector #121 for 2-56 Rod or Cable up to .078\"")
 "Du-Bro Kwik Grip E-Z Connector 2-56/2mm, Bulk 12-Pack")
 "1.5mm/2mm/2-56 EZ-A-Just Rod Ends up to 1.8mm shafts")
 "1.5mm/2mm/2-56 Heavy Duty EZ-A-Just Rod End up to 2mm Shafts")
 "Du-Bro 1/16\" Brass Coupler to 2-56 threaded Ball Link and Ball Stud")
 "Du-Bro Mini E/Z Link L Bend Keeper for .062 Wire")
 "Du-Bro E/Z Link L Bend Keeper .072")
 "L Bend Retainers by GWS for .063\" wire")
 "Du-Bro 2-56 Spring Steel Kwik-Links 12 Pack for .072 Wire")
 "Du-Bro 2-56 Steel Kwik-Links 12 Pack for .072 Wire")
 "Du-Bro 2-56 Spring Steel Kwik-Links 2-Pack for .072 Wire")
 "Du-Bro 2-56 Solder Kwik-Links 2-Pack for .072 Wire")
 "Sullivan 2-56 Gold-N-Clevises")
 "Sullivan 2-56 Gold-N-Clevises Bulk 12-Pack")
 "Du-Bro Over-Ride Servo Saver 2-56")
 "Radical RC Flexi-Keepers 2-56 Wire L Bends 4 Pack")