|
| |
For use with 2-56 threaded rods. Smaller lighter weight version. Usually used on .25 size (3 pound) and smaller models. Package of 2 each. Item is right most unit in photo.
SKU Number: DUB228
|
|
|
|
|
| |
2-56 x 1 INCH Thru-hole Threaded Brass Couplers for wire and cable up to .034 INCH. 8-PC
SKU Number: SUL512
|
|
|
|
|
| |
2 each 2-56 nylon clevis. Unit is the 2 pieces on the far right in sample photo.
SKU Number: DUB122
|
|
|
|
|
| |
12 each 2-56 nylon clevis with silicon tube safety retainers. Pair shown in photo.
SKU Number: DUB602
|
|
|
|
|
| |
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods. This brass connector has hex head to allow you to hold it while tightening.
SKU Number: DUB608
|
|
|
|
|
| |
Du-Bro's 2-56 size clevis with safety retainer. 2 each
SKU Number: DUB815
|
|
|
|
|
| |
Du-Bro's 2-56 size clevis with safety retainer. 12 each
FEATURES
Self tapping design leaves no slop on the pushrod threads.
Square nylon shank for easy installation and adjustment.
10% lighter than a steel clevis.
Brass plated stepped steel pin does not bind on control horns and has a large flat head for easy removal.
Brass plated steel safety lock slides into a groove on the pin for a secure and solid lock.
Safety lock is mounted in a track system on the clevis body to help prevent it from being lost.
INCLUDES
12 each 2-56 Safety Lock Kwik-Link Clevises
REQUIREMENTS
2-56 Pushrods of modeler's choice
Installing clevises onto pushrods
SPECIFICATIONS
Length: 1-1/8"
Width: 5/16"
Shank Width: 3/16"
COMMENTS
For other sizes of safety lock clevis', use:
2-56 (DUBQ1510 qty 2) (DUBQ1511 qty 12)
4-40 (DUBQ1514 qty 2) (DUBQ1515 qty 12)
2mm (DUBQ1518 qty 2) (DUBQ1519 qty 12)
For replacement Slide Locks, order DUBR0821
SKU Number: DUB816
|
|
|
|
|
| |
Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
SKU Number: DUB489
|
|
|
|
|
| |
E/Z Connectors for up to .078 (2-56) pushrod or cable. 4-40 x 1/8 Slotted Screw locks pushrod or cable in place. Black snap on washer & push on steel retainer included. 2 units per package.
SKU Number: DUB121
|
|
|
|
|
| |
Bulk Pack contains 12 each. Comes with standard press on nylon and permanent steel press on retainer. Also equipped with socket head fastener to allow for tighter installations. Drilled to clamp onto 2-56 and 2mm rods so common in ARFS.
SKU Number: DUB605
|
|
|
|
|
| |
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 1.85mm (.074"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Instal in 5/64" (1.9mm) hole.
SKU Number: EZADJRE17
|
|
|
|
|
| |
Four barrels, washers, nuts and set screws. Allen wrench not included, requires 1.5mm. Will work on any rod size 1.5 to 2mm (.079"). 2mm pushrods and 2-56 are usually this size or smaller. The threads are rolled and larger than the base wire diameter. Install in 7/64" (2.6mm) hole.
SKU Number: EZADJRE20
|
|
|
|
|
| |
Stud of ball is 0-80 thread with black nut. Perfect fit for most glow throttle arms pefectly. Bolt to control hors and servo horns also. Brass fitting fits and solders onto .062 (1/16") steel wire or pushrod cable. Nylon ball link also included.
SKU Number: DUB190
|
|
|
|
|
| |
Retains simple L bend pushrod ends in your control or servo horn. For .062 (1/16") wire. This is a common size music wire to use for hand built pushrods.
SKU Number: DUB940
|
|
|
|
|
| |
Easily snaps over simple L bends to retain your pushrod end in servo or control surface horn. For .072 wire size. .072 is the diameter of the non-treaded portions of 2-56 pre-threaded pushrods. TEMPORARILY OUT OF STOCK
SKU Number: DUB855
|
|
|
|
|
| |
GWS rack of 6 L bend ratainers. Simply bend an "L" into the end of your wire, put the eyelet of this retainer over the L end then clip the base over the leg of your wire. Perfect solution for quick and easy pushrod ends.
SKU Number: GWPRH16AA
|
|
|
|
|
| |
Spring Steel Kwik-Links are the tried and true top quality Kwik-Link. Ideal for control linkage hook-up. Use with threaded rods or threaded couplers. 2-56 are for use with .072 dia rods, link guards included. 4-40 are for use with .093 dia rods, spring keepers are included. Thread onto .072 wire. Typical wire size that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like left 2 items in sample photo. Weight per DUB600 link: 1 gram/link Made in the U.S.A.
SKU Number: DUB600
|
|
|
|
|
| |
Solder onto .072 wire. This is the typical size wire that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like center 2 items in sample photo.
SKU Number: DUB603
|
|
|
|
|
| |
Thread onto .072 wire. Typical wire size that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included. Unit looks like left 2 items in sample photo.
SKU Number: DUB109
|
|
|
|
|
| |
Solder onto .072 wire. This is the typical size wire that has 2-56 rolled threads on one end. Use to build your own custom length pushrods from music wire or "one-end" pre-threaded 2-56 rod. Link retaining sleeves included.
SKU Number: DUB112
|
|
|
|
|
| |
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering. (2) 2-56 Clevises and Retaining Clips Heat treated tempered steel with retaining clip. 2-56 thread. OUT OF STOCK, MANUFACTURER BACKORDER, ETA 2025
SKU Number: SUL525
|
|
|
|
|
| |
Gold-N-Clevises. These tempered steel clevises are the strongest clevises made. They feature an interlocking collar, welded pin and an exclusive steel retaining clip to prevent accidental opening. They are brass or tin plated for easy soldering. (12) 2-56 Clevises and Retaining Clips Heat treated tempered steel with retaining clip. 2-56 thread. 12 per package. OUT OF STOCK, MANUFACTURER BACKORDER, ETA 2025
SKU Number: SUL527
|
|
|
|
|
| |
Adjustable, spring action assembly protects servo from shock and stalling. Excellent for throttle or rudder nosewheel hookups. Protects servo gears from being stripped with shocks. Light and heavy duty spring included for up to .072 diameter control rods. 11 piece set.
SKU Number: DUB120
|
|
|
|
|
| |
Handy set of 8 black nylon keepers. Fits soft wire used to make 2-56 pushs rod wire. Black nylon material. Simply bend the end of your pushrod into an "L". Put the L through the servo or control horn. Bend the hand back and clip onto the rod. Simple use, removes and instals quickly. Keeps your push rods from slipping out of the control horns. Light weight, simple and they work great! Example photo is of our .032 park flier size "Flexi-Keeper" retaining an L bent push rod and a control horn. Control horn & wire are not included in set.
SKU Number: RRCFLEXIKEEP256
|
|
|
|
 "Du-Bro Mini Nylon Kwik Links 2-56")
 "Sullivan 2-56 Couplers for up to .034 Inch wire 8PC")
 "Du-Bro 2-56 Kwik Links Nylon 2-Pack")
 "Du-Bro 2-56 Kwik Links Nylon Bulk Pack")
 "Du-Bro Kwik Grip E-Z Connector 2-56/2mm")
 "Du-Bro 2-56 Safety Lock Kwik-Links")
 "Du-Bro 2-56 Safety Lock Kwik-Links 12PK")
 "Du-Bro Heavy Duty E-Z Connector 2-56/2mm")
 "Du-Bro E-Z Connector #121 for 2-56 Rod or Cable up to .078\"")
 "Du-Bro Kwik Grip E-Z Connector 2-56/2mm, Bulk 12-Pack")
 "1.5mm/2mm/2-56 EZ-A-Just Rod Ends up to 1.8mm shafts")
 "1.5mm/2mm/2-56 Heavy Duty EZ-A-Just Rod End up to 2mm Shafts")
 "Du-Bro 1/16\" Brass Coupler to 2-56 threaded Ball Link and Ball Stud")
 "Du-Bro Mini E/Z Link L Bend Keeper for .062 Wire")
 "Du-Bro E/Z Link L Bend Keeper .072")
 "L Bend Retainers by GWS for .063\" wire")
 "Du-Bro 2-56 Spring Steel Kwik-Links 12 Pack for .072 Wire")
 "Du-Bro 2-56 Steel Kwik-Links 12 Pack for .072 Wire")
 "Du-Bro 2-56 Spring Steel Kwik-Links 2-Pack for .072 Wire")
 "Du-Bro 2-56 Solder Kwik-Links 2 Pack for .072 Wire")
 "Sullivan 2-56 Gold-N-Clevises")
 "Sullivan 2-56 Gold-N-Clevises Bulk 12-Pack")
 "Du-Bro Over-Ride Servo Saver 2-56")
 "Radical RC Flexi-Keepers 2-56 Wire L Bends 4 Pack")